Grease Oil Seal for Hubs Wheel and Axle

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Model NO.: OEM
• Material: Rubber
• Muffler Type: Rear Muffler
• Deck: Single
• Transport Package: Pallet
• Specification: many
• Trademark: JL
• Origin: China
• HS Code: 8716900
• Production Capacity: 50000

Product Description

Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals. Oil seal is an integral part in any rotating and moving part assembly. They close spaces between stationary and moving components in mechanical equipment.  An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. 
Temperature: -50°C -300°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed: 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification: 6-13000mm



Advantages
1.Good abrasion resistance property;
2.Good high temperature resistance and low temperature resistance property;
3.Good ozone corrosion resistance property and climate adaptability;
4.High abrasion resistance property;
5.Low abrasion resistance property;
6.Low permanent compression deformation feature;
7. Good resilience.
Regular Sizes

ID*OD*H mm	Type	ID*OD*H mm	Type	ID*OD*H mm	Type	ID*OD*H mm	Type
6x22x8	TC	12x32x10	TC	17x30x8	TC	20x40x8	TC
8x14x4	SC	12x32x7	TC	17x30x10	TC	20x42x7	TC
8x16x4	TC	13x22x7	TC	17x30x10	TC	20x42x7	TC
8x16x5	TC	13x24x7	SC	17x35x10	TC	20x42x10	TC
8x16x7	SC	14x24x7	SC	17x35x10	SC	20x45x10	TC
8x19x7	TC	14x24x8	TC	17x35x5	TC	20x45x10	TC
8x20x7	TC	14x25x7	TC	17x35x7	TC	20x45x10	SC
8x22x7	SC	14x28x4	TC	17x35x8	TC	20x47x7	TC
8x22x8	SC	14x28x7	TC	17x40x7	TC	20x47x8	TC
8x22x8	TC	14x28x7	TC	17x40x10	TC	20x47x10	SC
9x22x7	TC	14x28x10	TC	17x40x12	TC	20x47x10	TC
10x19x5	TC	14x29x7	TC	18x28x5	TC	20x50x10	TC
10x19x6	TC	14x30x7	TC	18x30x6	TC	20x52x7	TC
10x19x7	TC	14x30x10	TC	18x30x7	TC	20x52x3	SC
10x20x8	TC	14x35x7	TC	18x30x8	TC	20x52x6	SC
10x22x10	TC	14x35x10	SC	18x30x10	SC	21x35x6	TC
10x22x10	TC	15x24x5	TC	18x30x10	TC	21x35x7	TC
10x22x7	SC	15x24x7	TC	18x35x10	SC	21x35x8	TC
10x22x8	SC	15x25x5	TC	18x35x10	TC	21x38x6	TC
10x22x8	TC	15x26x7	TC	18x35x7	TC	22x30x10	SC
10x25x5	SC	15x28x5	SC	18x40x7	TC	22x32x5	SC
10x25x10	SC	15x28x7	TC	18x40x10	TC	22x32x7	TC
10x26x4	TC	15x28x7	SC	20x30x5	SC	22x35x6	TC
10x26x7	TC	15x28x10	SC	20x30x5	TC	22x35x7	TC
10x26x7	SC	15x30x5	SC	20x30x6	TC	22x35x6.7	TC
10x26x8	TC	15x30x5	TC	20x30x7	SC	22x35x8	TC
10x28x7	TC	15x30x10	TC	20x30x7	SC	22x38x8	TC
10x28x10	TC	15x30x10	SC	20x30x7	TC	22x38x10	SC
11x19x5	TC	15x32x7	TC	20x30x8	TC	22x38x10	TC
12x19x3	SC	15x35x6	TC	20x30x9	TC	22x40x6	TC
12x20x6	SC	15x35x10	TC	20x30x10	SC	22x40x7	TC
12x22x5	TC	15x35x7	TC	20x32x7	TC	22x40x8	TC
12x22x6	TC	15x40x10	SC	20x32x7	TC	22x40x8	TC
12x22x7	TC	16x28x7	TC	20x35x10	TC	22x40x9	TC
12x22x7	SC	16x30x7	TC	20x35x10	TC	22x40x10	SC
12x24x7	SC	16x30x7.5	TC	20x35x5	TC	22x40x10	TC
12x24x7	TC	16x30x10	TC	20x35x7	TC	22x42x7	TC
12x25x5	SC	16x35x7	TC	20x35x7	TC	22x42x10	SC
12x25x7	TC	16x35x10	TC	20x35x8	SC	22x42x11	TC
12x25x10	TC	16x35x10	TC	20x37x7	TC	22x42x12	SC
12x28x7	TC	17x28x5	SC	20x37x7	TC	22x45x10	TC
12x28x8	TC	17x28x7	TC	20x40x10	TC	22x45x10	SC
12x28x10	TC	17x28x7	SC	20x40x7	TC	22x50x10	TC
12x30x10	TC	17x30x7	TC	20x40x7	SC	22x65x8	TC